[Openal] Re: 3d VR setup

[Josh Green]

Hey, 
 
I wouldn't normally reply because I havn't really used OpenAL much.
But, since you seem to be keen to get moving... Just a quick sanity check for you....
It might be a dumb suggestion..
But could it be possible that you are modifying the wrong axis? i.e. The problem you describe sounds like what would happen if you moved the source UP and DOWN instead of FRONT to BACK. Failing that, I think I've read similar posts like this before, Perhaps check the archives?
 
I'm sure someone else will respond soon enough for you!Good Luck!
 
-- Josh> Date: Sat, 27 Oct 2007 20:35:22 -0400> From: bct2 at calvin.edu> To: openal at opensource.creative.com> Subject: [Openal] Re: 3d VR setup> > Sorry for the constant posting, I just forgot to include something before.> > I have gotten alsa configured such that "aplay chad-id.wav" will work.> Basically it says "left -front" and it should come from the left-front> speaker.> Well the fix for that was I changed my ~/.asoundrc file with this> > pcm.!default {> type plug> slave.pcm "surround51"> slave.channels 6> route_policy duplicate> }> > However, that didn't solve my front and back speaker problem, it still> seems that i can only pan left to right... front and back fadding only> makes it louder or softer in both front and back at the same time.> > any thoughts?> > -Brandon> > On 10/27/07, Brandon Thomas <bct2 at calvin.edu> wrote:> > One of the problems might be that there is something screwy w/ my> > access to each speaker> > at one point I could access each one, but now I have to use a flag> > when testing it> > ie this sound wav tests each channel but I have to use this flag to> > get it to work.> >> > aplay -Dplug:surround51 chan-id.wav> >> > where as before: "aplay chad-id.wav" would just test work> > -Brandon> >> _______________________________________________> Openal mailing list> Openal at opensource.creative.com> http://opensource.creative.com/mailman/listinfo/openal
_________________________________________________________________
Overpaid or Underpaid? Check our comprehensive Salary Centre
http://a.ninemsn.com.au/b.aspx?URL=http%3A%2F%2Fcontent%2Emycareer%2Ecom%2Eau%2Fsalary%2Dcentre%3Fs%5Fcid%3D595810&_t=766724125&_r=Hotmail_Email_Tagline_MyCareer_Oct07&_m=EXT
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://opensource.creative.com/pipermail/openal/attachments/20071028/7d067fda/attachment.html